Burkert Type 8642 - Manual (Page 35)

34 - 8642
english
Parameter Description
TRAVEL_COUNT_LIM Limit for TRAVEL_COUNT; at 0
TRAVEL_COUNT_LIM will not be processed.
If the LIMIT value is exceeded, the corres-
ponding bit will be set in CHECK_BACK.
TRAVEL_TIME_CLOSE_OPEN Limit for the time in seconds between the
change of the state from CLOSE to
OPEN; with 0, the time is not processed.
If the value is exceeded, the corresponding
bit will be set in CHECK_BACK. Times less
than 2 seconds cannot be monitored.
TRAVEL_TIME_OPEN_CLOSE Limit for the time in seconds between the
change of the state from OPEN to
CLOSE; with 0, the time is not processed.
If the value is exceeded, the corresponding
bit will be set in CHECK_BACK. Times less
than 2 seconds cannot be monitored.
TRAVEL_TIME_CLOSE_ Maximum difference between
OPEN_TOL TRAVEL_TIME_CLOSE_OPEN and the
current switching time
TRAVEL_TIME_OPEN_ Maximum difference between
CLOSE_TOL TRAVEL_TIME_OPEN_CLOSE and the
current switching time
SELF_CALIB_CMD Initiation of a device-specific calibration
procedure, manufacturer specific 0-default.
y = 0 active undamped
y = 1 active damped
x = 0 sensor indicates “valve open”
x = 1 sensor indicates “valve closed”
x y