Burkert Type 8642 - Manual (Page 25)

24 - 8642
english
6.2.1.4 Parameter description of the physical block
Parameter Parameter description
DEVICE_ID Identification of the device
DEVICE_MAN_ID Identification code of the manufacturer of the field
device (Bürkert = 120)
DEVICE_SER_NUM Serial number of the field device
DIAGNOSIS Detailed information of the device, bitwise coded.
DIAGNOSIS_MASK Definiton of supported DIAGNOSIS information
bits
0 = not supported
1 = supported
DIA_MEM_CHKSUM Memory error
DIA_CONF_INVAL Configuration not valid
DIA_WARMSTART New start
DIA_COLDSTART Restart-up
HARDWARE_REVISION Version number of the hardware of the field device
SOFTWARE_REVISION Version number of the software of the field device
DIAGNOSIS_EXTENSION Supplementary diagnosis for device manufacturer
DIAGNOSIS_MASK_ Definition of the information covered
EXTENSION
FACTORY_RESET 1 Reset to default values, not bus address
2506 Warm start
2712 Reset bus address only,
not IDENT_NUMBER_SELECTOR