Burkert Type 2101 - Manual (Page 33)

33
Maintenance,Cleaning
installing swivel plate
→
Connect swivel plate to the spindle.
→
Align bores of the swivel plate and spindle.
→
Support swivel plate on the cylindrical part with the aid of a
prism or something similar.
→
Insert pin into the bore.
→
Swage pin bores on both sides of the swivel plate using a chisel
or center punch.
Spindle
Pin
Swivel plate
Fig. 30: Swivel plate
installing the actuator on the valve body
For description see chapter entitled “Installing the actuator on the
valve body”, page 27.
11 malfuncTiOns
malfunction remedial action
Actuator does
not switch Pilot air port interchanged 9)
CFA:
→
Connecting pilot air port 1
CFB:
→
Connecting pilot air port 1
CFI:
→
Pilot air port 1: Open
Pilot air port 2: Close
Pilot pressure too low
→
Observe pressure specifications on the
type label
Medium pressure too high
→
Observe pressure specifications on the
type label
Flow direction reversed
→
Observe direction arrow on the body
english
Type 2101