Brooks Instrument XacTorr CMX160 User Manual
Page 8
p.2
They are not, however, a substitute for determining your own internal safety
procedures.
CAUTION
!
!
Use of controls, adjustments, or procedures other than those specified in this
manual without consulting a competent safety professional may result in exposure
to potential hazards. Always follow established industrial safety practices when
operating production equipment.
1.5.1 Unsafe acts
•
NEVER defeat a safety interlock unless you are certified to perform the
procedure and have been specifically directed to defeat the interlock.
•
NEVER operate or service this system without a thorough knowledge of the
dangers involved and the precautions to be followed for safe and efficient
operation.
•
NEVER disregard instructions to lockout/tagout the system.
•
NEVER permit unauthorized or untrained personnel to use the system.
•
NEVER STAND IN WATER OR ON A WET SURFACE WHILE OPERATING
ANY ELECTRICALLY POWERED EQUIPMENT.
•
NEVER place your hands near moving parts or energized parts or
subsystems. Components can move rapidly.
•
NEVER remove a warning label from the equipment.
•
NEVER operate damaged equipment.
•
NEVER permit unauthorized or untrained personnel access to the system.
1.5.2 Recommended practices
•
USE THE BUDDY SYSTEM: ALWAYS perform maintenance procedures in
teams of two or more people; one to monitor the controls and indicators, and
one to watch the system operation.
•
ALWAYS observe all warning labels.
•
ALWAYS avoid all unsafe acts.
CAUTION
!
!
Use of controls, adjustments, or procedures other than those specified in this
manual without consulting a competent safety professional may result in exposure
to potential hazards
CAUTION
!
!
The safety procedures described in this manual are minimum guidelines. It is
believed that these guidelines will provide an acceptable level of safety. These
guidelines, however, should not be considered a substitute for determining your
own internal safety procedures in consultation with a competent safety
professional.
1.0
_INTRODUCTION