0 _description, Initial warm-up - analog (typical), Steady state - analog (typical) – Brooks Instrument XacTorr CMX160 User Manual
Page 16: Initial warm-up - devicenet, Typical), Steady state - devicenet (typical), Devicenet) w/9-pin d-sub female (analog)
p.10
2.9 PRODUCT SPECIFICATIONS
Table 3: Digital CM Specifications
1
Includes hysteresis, linearity, and repeatability within the calibrated range at 21°C.
2
Ambient Operating Temperature with 50 linear feet of airflow = 15-45°C.
3
15 Pin Male D-Sub Model requires an additional 60mA to power the internal relays (if energized).
4
Process relays are UL
®
recognized components rated for 100,000 cycles at 1A, 30V DC, Resistive.
All specifications subject to change without notice.
GAUGE OPERATING TEMPERATURE
45°C
100°C
160°C
Range
0.1, 1, 2, 10, 100, 1000 Torr
1, 2, 10, 100, 1000
Accuracy
1
1000 Torr
100 Torr
20 Torr
10 Torr
2 Torr
1 Torr
<1 Torr
± 0.25% of reading
± 0.15% of reading
± 0.15% of reading
± 0.15% of reading
± 0.15% of reading
± 0.15% of reading
± 0.25% of reading
± 0.25% of reading
± 0.25% of reading
± 0.25% of reading
± 0.25% of reading
± 0.35% of reading
± 0.35% of reading
N/A
Measurement Range
4 Decades
Temperature Effects on Zero
(TCZO)
± 0.002% of FS/°C
Temperature Effects on Span
(TCFSO)
± 0.02% of FS/°C
Ambient Operating
Temperature
2
15°C to 35°C
15°C to 45°C
15°C to 35°C
Exposed Materials
Inconel
®
and/or AISI 316L Stainless Steel
Volume
17cc
Approximate Shipping Weight
1.40 lbs (726 grams)
Overpressure Limit
17 PSIA or 125% of Full Scale, whichever is greater
Power Input
Initial Warm-up -
Analog (Typical)
3,4
270mA @ 15 VDC (±5%)
620mA @±15 VDC (±5%) 620mA @±15 VDC (±5%)
Steady State -
Analog (Typical)
3
175mA @ 15 VDC (±5%)
350mA @±15 VDC (±5%) 550mA @±15 VDC (±5%)
Initial Warm-up -
DeviceNet
®
(Typical)
400mA @ 24 VDC
900mA @ 24 VDC
950mA @ 24 VDC
Steady State -
DeviceNet
(Typical)
300mA @ 24 VDC
600mA @ 24 VDC
600mA @ 24 VDC
Output
0 - 10 VDC (5k load) minimum
Relay Contact Rating
4
(available on 15 Pin Male D-
Sub Interface)
1A @ 30 VDC / 0.3A @ 125 VDC
Electrical Connector Type
Analog
RS-485
DeviceNet
9-pin D-sub male or 15-pin D-sub male
2.5 mm mini jack for RS-485 Communications Port
5-pin eurofast
®
(DeviceNet) w/9-pin D-sub Female (Analog)
Certification
Fully CE Compliant to EMC Directive 89/336/EEC
2.0
_DESCRIPTION