Brooks Instrument GF81 - Manual (Page 30)

2-10
Brooks ® GF40/GF80/GF81 Devices
Installation and Operation Manual
X-TMF-GF40-GF80-Series-MFC-eng
Part Number: 541B161AAG
June, 2013
Section 2 Installation
2-18 Using the MultiFlo TM Configurator
The MutliFlo Configurator application is used to configure the gas and
range of the GF40/GF80 Series devices.
The MultiFlo Configurator application allows communication to GF40/GF80
Series devices through personal computer with serial COM Port and a
Windows XP or Windows 7 operating system. It’s primary function is to
configure gas and flow ranges within defined standard configurations. Flow
ranges are configured to the Nitrogen equivalent.
Using the MultiFlo Configurator software, configure the gas and flow rate
according to Table 2-2.
Table 2-2 Gas and Flow Ranges - MultiFlo Configurable - N2 Equivalent
The MultiFlo Configurator interfaces to the GF40/GF80 Series device
through RS485. There are various ways to connect the device regardless of
device configuration. Devices may be connected through the diagnostic port
using cables in one of the two Basic MultiFlo Configurator Kits.
778Z010ZZZ Basic MultiFlo Configurator Kit
A331710003 Cable Assembly 2.5mm
A332300001 Converter 232/485
Figure 2-5 MultiFlo Cable Adaptor