eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 92)

92
area with a dimmed red background.
Deletion of the detection zone is now complete. To create a detection zone:
1. Select a Situation analysis object. Set the nodes of the closed area inside or outside of
which you want to create a detection zone (see steps 1 and 2 in the previous instructions).
2. Use the green icons to create a detection zone.
Icon Executed function
Creates a detection zone inside the outlined
area
Creates a detection zone outside the
outlined area
3. Click the Apply button.
Creation of the detection zone is now complete.
Creating a Detection Tool object
To activate the needed type of situation analysis detection, you must create the corresponding
object (see the section titled
Types of Situation Analysis Detection Tools ).
To create a Detection Tool object, you must perform the following steps:
1. In the branch of the Situation analysis object which offers a means of analyzing the
situation in the desired video camera's field of view, click Create.
2. Highlight the Select detection type link which appears (1).
eLineTechnology.com 303.938.8062