eLine Technology EYS-VMS eyStream User Manual Part1 - Manual (Page 62)

62
The configuration field for the selected object will be displayed in the area on the right (2).
2. Select Yes from the list in the Enable field to enable the video camera.
3. Assign the video camera a name which will be displayed in the objects tree and in the
viewing tile, in the Name field.
The ID of a video camera object is set automatically during creation. However, it can be
edited in the corresponding field. The ID is also the serial number of the video camera: in
theMonitor interface window and in the equipment tree of the server, the video cameras
are placed in ascending order by ID.
4. Enter the number of the network port through which data exchange between the video
camera and the software will take place, if needed. The default value is 80.
Note
At first the port number is set through the camera's Web interface
eLineTechnology.com 303.938.8062