Configuration of the eystream software package, Connecting to another server quickly, General information on configuring system objects – eLine Technology EYS-VMS eyStream User Manual Part1 User Manual
Page 46: Procedure for configuring system objects
46
1.
Exit the EyStream user interface (see the section
Shutdown
).
2.
When the authorization window appears, enter the user name under which you need to log
in and the corresponding password and click Connect.
Switching users is now complete.
Connecting to Another Server Quickly
You can connect to another server without fully exiting the client.
To do this, follow the steps below:
1.
Exit the EyStream user interface (see the section
Shutdown
).
2.
When the authorization window appears, select the server to which you need to connect the
client from the Computer list.
3.
Enter the user name under which you need to log in and the corresponding password and
click Connect.
Connection to another server is now complete.
Configuration of the EyStream Software
Package
General Information on Configuring System Objects
Procedure for Configuring System Objects
System objects form the basis for configuring the EyStream software package; you can set them up
in the Devices section of the Settings tab.
eLineTechnology.com
303.938.8062