Draw-Tite 59550 CARGO CARRIER - PREMIUM FOLDING - Manual (Page 4)

Product Code:
Product Name:
Please read all instructions carefully before assembly, installation and/or use of this product.
59550
DART CARGO BASKET
INSTALL & OPERATE CARGO
BASKET
• With the help of another person,
install basket into your 2” receiver
hitch.
• Line up threaded insert in shank with
5/8 hole in hitch and install the Anti-
Rattle Pin as shown.
• Tighten pin until snug.
• Install Clip onto end of anti-rattle pin.
6
Pull handle to tilt
Anti-Rattle Pin
Clip
Holes for
License plate
www.rolaproducts.com Cequent Performance Products, Inc.
Plymouth, MI 48170
59550N Rev E 5-1-12
LOADING
Load the Cargo Carrier so that most of the weight is in the center of the platform.
IMPORTANT NOTES
•All Pins, Clips and fasteners must be secured before every use.
• Check security of load, fasteners, pin and clip at fuel and rest stops.
• If the Cargo Carrier or cargo, blocks the
license plate, you can mount the license plate directly to the back of the cargo
carrier using the two existing holes in the rear panels. (screws not included)
CORRECT
INCORRECT
CARE AND USAGE
•Keep the unit clean and remove road salt and debris.
• Do not allow harsh chemicals, road salt, or mud to accumulate on the product for an extended period of time.
• Wash the product with mild soap and water only and a non-abrasive cloth after use.
• The lock and hinges should be lubricated with graphite or similar dry lubricant.
Printed in China