Draw-Tite 59550 CARGO CARRIER - PREMIUM FOLDING - Manual (Page 2)

Product Code:
Product Name:
Please read all instructions carefully before assembly, installation and/or use of this product.
59550
DART CARGO BASKET
2
ATTACH REAR CENTER PANEL
•
Use (4) self-tapping screws to
attach the rear panel.
• Note: the ROLA panel is attached
to side with holes for light
accessory (sold separately).
ROLA panel
Hole for light kit
#8 Tapping Screw
www.rolaproducts.com Cequent Performance Products, Inc.
Plymouth, MI 48170
59550N Rev E 5-1-12
3
ATTACH SHANK TO BASKET
• Place shank assembly onto bottom of
cargo basket and align the four holes
in shank with holes in basket. The
handle side of shank goes toward
basket side with ROLA panel.
• Install (4) four 3/8 carriage bolts from
inside basket, flat washers and lock
nuts as shown.
• Tighten all 3/8-16 GR5 bolts to 20 ft•lb
• Note: Flat washer will form to bracket.
Page 2
3/8-16 x 1-1/4”
Carriage Bolt
(4) Places
3/8-16 Lock Nut
Flat washer
(4) Places
Printed in China