beautypg.com

Draw-Tite 59550 CARGO CARRIER - PREMIUM FOLDING User Manual

Dart cargo basket

background image

Product Code:

Product Name:

59550

DART CARGO BASKET

Please read all instructions carefully before assembly, installation and/or use of this product.

TOOLS REQUIRED:
½” Wrench
9/16 Wrench &
9/16 Socket
¾ Wrench
1-1/16” Wrench or
Adjustable wrench
#3 Phillips Screwdriver

WARNING: The Maximum capacity is 450 pounds.

DO NOT EXCEED lower of vehicle mfg’s or hitch mfg’s maximum tongue weight rating.

WARNING: Not for transport of people, animals, or flammable liquids.

WARNING: If the load or cargo carrier blocks or impairs visibility of the taillights or turn signals, use light kit #20174.

WARNING: If the cargo carrier or the contents being transported is in line with the exhaust outlet, an exhaust tip must be

used to redirect the exhaust flow away from the cargo platform or contents.

WARNING: Do not lubricate threads. Bolt failure may occur due to over tightening.

WARNING: Securely fasten load to cargo carrier. Do not carry any loads wider than your vehicle.

WARNING: Do not drill or weld to this product.

WARNING: Relocate license plate if blocked by load or cargo carrier.

Kit Contents:

ITEM

QTY.

DESCRIPTION

ITEM

QTY.

DESCRIPTION

a

4

Hex Bolt 3/8-16 x 3-1/4 Gr5

f

2

Hex Lock nut 1/2-13 Gr2

b

8

Hex Lock nut 3/8-16 Gr2

g

1

Anti-Rattle Pin 5/8-11

c

4

Self Tapping Screw #8-18 x 1/2

h

4

Pan head screw M6-1.0

d

4

Carriage bolt 3/8-16 x 1-1/4 Gr5

j

1

Spring Clip

e

2

Hex Bolt 1/2-13 x 3-1/4 Gr5

k

4

4

Flat washer 3/8

Flat washer 3/8

www.rolaproducts.com

Cequent Performance Products, Inc.
Plymouth, MI 48170

59550N Rev E 5-1-12

ASSEMBLE CARGO BASKET

Place each half of cargo basket on a
flat surface. Line up the locator
tubes and push the two halves
together.

Install the (4) four 3/8 x 3-1/4” hex
bolts through the connector tubes.
Install 3/8 hex nuts and tighten
securely.

1

Page 1

3/8-16 x 3-1/4” Hex Bolt
(4) Places

3/8-16 Hex Nut
(4) Places

Locator tube

Connector tube

a) Hex Bolt 3/8-16 x 3-1/4

b) Lock nut 3/8-16

c) Screw #8-18 x 1/2

d) Carriage bolt

3/8-16 x 1-1/4

e) Hex Bolt

½-13 x 3-1/4

f) Lock nut ½-13

g) Anti-Rattle Pin

j) Clip

h) Screw Pan head

M6-1.0 x 18mm

k) Flat washer 3/8

Printed in China