Analog Way Smart MatriX User Manual

Page 63

Memorizing Frames

1. In

the

Input

Selection

section,

click on the source button

(

1 to

12) of the source you wish to record as

a frame.

2. Click on the Logos/Frames tab of the RCS

interface. Then click on the Record Frame button.

3. Click on the field next to the first free Frame to

select it.

4. Click on the Execute button.

Working with Logos

It is possible to store up to 8 logos in the

Smart MatriX non volatile memory. Logos work in much the same

way as frames, and can be recorded from any of the

Smart MatriX’ 12 sources.

Logos have more attributes than frames. They can be sized, positionned, but also keyed via color cutout

selection or Luma Key.

Memorizing Logos

1. In the Input Selection section, click on the source

button (

1 to

12) of the source you wish to record

as a logo.

2. In the Logos/Frames tab, click Record Logo, then

select an empty logo memory slot (

1 to

8) to

record your logo into.

3. Adjust position, size and keying attributes for your

logo.

4. Click on Execute to record your logo into the

selected memory slot. The

Smart MatriX RCS will

display a progress bar while recording the logo.

5. In the Input Selection section, click the LOGO1 button, and select logo number (

1 to

8) you wish to use.

Your logo will appear on the preview screen above any existing layer on screen.

6. Click on the TAKE button. Your logo will appear on the main display.