Analog Way Smart MatriX User Manual

Page 41

OUTPUT #1

OUTPUT #2

4- Copy&H.Flip all modes:

the output #2 will be exactly the same as the output #1 except the fact that the

selected layer will have its H position and data flipped.

*NOTE*: Remember that to simplify the use of this feature, you need to manipulate the Output #1. While in

mirror mode, the Output #2 will follow the desired steps.

*NOTE*: Every change on the Output #2 will have an effect only on the Output #2, but remember that if a

change occurs on the Output #1 after that, the Output #2 will update automatically to match output #1 (in

mode 2/3/4).

❹

OUTPUT #1

OUTPUT #2

3- Copy & H.pos Flip mode:

the output #2 will be exactly the same as the output #1 except the fact that the

selected layer will have its H position flipped (standard Mirror mode).

❸