ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 95)

Appendix
Goldeye Technical Manual V2.5.0
95
AcquisitionControl
AnalogControls
Feature Description
AcquisitionMode This feature controls the acquisition mode of the software. This
feature works independently (!) of the chosen camera mode
(Continuous, IOD hardware trigger, IOD hardware timer). It
describes how many frames should be acquired.
AcquisitionStart Starts the image acquisition of the camera.
AcquisitionStop Stops the image acquisition of the camera.
TriggerMode Modifies the trigger mode of the camera. When the trigger mode
is Off, the camera will generate frames independently. When the
trigger mode is On the camera is switched to the so called IOD
(Image On Demand) mode. In this mode the camera waits for an
external trigger signal or an timer pulse. To control exposure and
dark time trigger mode must be switched to On.
ExposureMode Start or stop the internal exposure signal timer.
ExposureTime Sets the Exposure time (in microseconds).
ExposureTimeAbs Sets the Exposure time (in microseconds).
ExposureTimeGranularity Exposure time granularity.
ExposureTimeAbsMs Sets the Exposure time (in milliseconds).
DarkTime Sets the Dark time (in microseconds).
DarkTimeAbs Sets the Dark time (in microseconds).
DarkTimeGranularity Dark time granularity.
DarkTimeAbsMs Sets the Dark time (in milliseconds).
Table 49: Camera standard feature: AcquisitionControl
Feature Description
Gain This feature controls the selected gain as a raw integer value.
Table 50: Camera standard feature: AnalogControls