ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 64)

Goldeye Technical Manual V2.5.0
64
TriggerSignalRouting (W)
Current parameter settings (Y)
The command Y=1 shows the actual set parameter values.
Show help text (?)
The command ?=1 shows a command reference text at the serial terminal. It
lists a short description for each command available in the firmware.
GigE feature name (CameraSpecialFeatures) Feature visibility Description
TriggerSignalRouting
(firmware version V3.4.0 and higher) Guru CameraHead
The trigger signal is routed
directly to the camera head.
The TriggerSelector feature
can not be set to ExposureStart
in this mode.
PT1000 (default)
The trigger signal is routed to
the Pleora board. This is
necessary to enable the
TriggerSelector functionality.
(See table: Camera standard
feature: AcquisitionControl
on
page 46 . )
Table 31: GigE feature: TriggerSignalRouting
Note

This function is not available as GigE Vision feature.
Note

This function is not available as GigE Vision feature.