Manual overview – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 9
Goldeye Technical Manual V2.5.0
9
Manual overview
This manual overview outlines the contents of each chapter of this manual.
•
Contacting Allied Vision Technologies
on page 6 lists AVT contact
data (phone numbers and URLs) for both:
– Technical information / ordering
– Commercial information
•
on page 7 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols). Furthermore you learn
how to get more information on how to install hardware, available AVT
software (incl. documentation) and where to get it.
•
on page 13 gives you information about conformity of
AVT cameras (CE, FCC, RoHS).
•
on page 14 lists camera details and measured spec-
tral transmission diagrams for each camera type.
•
on page 23 provides CAD drawings of stan-
dard housing models (2D drawings), tripod adapter and cross sections of
the mounts.
•
on page 31 describes the first steps to get the camera
into operation: camera control signals and camera controls as well as
adjusting the image process.
•
on page 37 describes the control junction (I/O
pin assignment), inputs / outputs and trigger features.
•
on page 55 describes the function of the
Goldeye P-.../Goldeye CL-... firmware. It is related to the individual
modules of image processing and shows in what way the user can control
these modules via the serial interface.
•
on page 60 describes the basic
configuration options and general commands available for the user, being
important for the operation of an ex factory preconfigured camera. Most
probably the information stated here will be sufficient for most of the
users.
•
Advanced parameters and commands
on page 66 describes the
advanced configuration of the Goldeye P-.../Goldeye CL-... models. For
the control of an ex factory set up camera the intervention within the
parameters stated here or rather the use of the mentioned commands is
only necessary in exceptional cases.
•
on page 81 describes the
general command reference of the Goldeye P-.../Goldeye CL-... firmware.
•
on page 99 gives you quick access to all relevant data in
this manual.