Baud rate (s) – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 78
Goldeye Technical Manual V2.5.0
78
>
H=0[CR]
Baud rate (s)
The baud rate of the RS232 interface is determined by use of register
s:
The bits of the parameter value are divided into three different sized bit groups
a, e and x. Each bit group has a special function, being independent of the other
ones:
GigE Feature Name
Feature Visibility
Description
IIS_OperationMode
Expert
Operation mode of the integrator
and image store.
(H=
While reading this feature the
MSB shows the state of the
integration process (0=Idle,
1=Busy)
Table 43: GigE feature: Integrator and image store (IIS)
Caution
Do not change the baud rate, if you control the camera via GigE
Vision features.
This manual is related to the following products: