beautypg.com

ALLIED Vision Technologies Goldeye P-032 SWIR User Manual

Page 77

background image

Goldeye Technical Manual V2.5.0

77

Example

Integration of 32 images simultaneously to the output of the actual integration
image and copy as a reference image

A into the correction data memory

(c=1, b=6, a=1) => ccbbba = 011101 [binary] = 0x1D. As soon as the integration
is terminated, you have to wait for at least two image cycles, before the copy
procedure is finished.

>

H=1D[CR]

...wait for at least 36 image cycles (34 + 2 frames jitter buffer, 0.9 seconds at 40
images / sec.) or poll the state of bit group

d with Y=1...

H 0

Operation Mode

Integrator/Image Store

F

E

D

C

B

A

9

8

7

6

5

4

3

2

1

0

-

-

-

-

-

-

-

-

d

-

c

c

b

b

b

a

ro

rw rw rw rw rw rw

Bit group

Value (hex)

Description

a

0

Output: deactivated. Data are passed through transparently.

1

Output: activated. Output of actual image storage content.

b

0

Integration: deactivated. The image storage content is not changed.

1

Integration: 1 image. The following image is copied into the image
storage.

4

Integration: 8 images. The following 8 images are integrated and the
result is copied into the image storage.

5

Integration: 16 images. The following 16 images are integrated and the
result is copied into the image storage.

6

Integration: 32 images. The following 32 images are integrated and the
result is copied into the image storage.

7

Integration: 64 images. The following 64 images are integrated and the
result is copied into the image storage.

c

0

Copy: deactivated.

1

Copy: Target A. The image storage content of the integrator is copied
into the correction data storage as low reference image of the two point
correction

2

Copy: Target B. The image storage content of the integrator is copied
into the correction data storage as high reference image of the two
point correction

d

0

Integration completed. (This value can only be read out.)

1

Integration still running. (This value can only be read out.)

Note: The Integration is activated by change of the register content of bit group x of

H. If e.g.

directly following the integration of 64 images a further integration of 64 images is started,
another value has to be written into the register first.

Example:

H=E, H=0, H=E.

Table 42: Integrator and image store: values

This manual is related to the following products: