ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 70)

Goldeye Technical Manual V2.5.0
70
Recording of temporary reference images
(A, B, J, K)
For an optimal image quality both reference images of the two-point correction
may temporarily be replaced by newly recorded ones within the actual correc-
tion memory page
S. For recording one requires a reference area with a spa-
tially constant brightness. The reference area is placed in front of the camera
filling the complete image and being out of focus of the lens. By assignment of
a special value to parameter
A, the recording of a low (dark) reference image
can be started now, or when assigning to parameter B the recording of a high
(light) reference image.
Example
New recording of a low reference image of the two-point correction within
actual correction memory page
S.
GigE Feature Name Feature Visibility Description
TPC_OperationMode Expert Operation mode of the two-point
correction.
(E= command)
TPC_CorrectionData_FileNumber Expert File number of the flash file
containing the set values for the
two-point correction.
(N= command)
TPC_SetValue_LowRef Expert Define the set value for the low
reference image of the two-point
correction.
(J= command)
TPC_SetValue_HighRef Expert Define the set value for the high
reference image of the two-point
correction.
(K= command)
TPC_FirstImage_LowRef Expert File number of the first low
reference image of the two-point
correction.
(A= command)
TPC_FirstImage_HighRef Expert File number of the first high
reference image of the two-point
correction.
(B= command)
Table 35: GigE feature: TwoPointCorrection (TPC)