beautypg.com

Camera interfaces, Control connector, Chapter – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual

Page 37

background image

Camera interfaces

Goldeye Technical Manual V2.5.0

37

Camera interfaces

This chapter gives you information on the control junction, inputs and outputs
and trigger features.

Control connector

Camera I/O connector pin assignment (15-pin
D-sub connector)

This connector is intended for the power supply as well as for controlling the
camera by the user.

Furthermore, some output signals are available, showing the camera state.

Note

Timing specifications in this chapter are valid:

starting SN 00102 (P-032)

SN 00308 (P-008)

For older versions: contact AVT Technical Support.

www

For accessories such as cables see:

http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html

Pin Signal

Direction

Level

Description

1

External Power

+12 V DC (-0%
/ +5%)

Power supply

max. 2.8 A (Goldeye P-
008...)
max. 1.3 A (Goldeye P-
032...)
depending on model

2

3

External GND

4

5

---

Reserved
(do not connect)

6

---

Reserved
(do not connect)

7

RxD

In

RS232

8

TxD

Out

RS232

Table 18: Camera I/O connector pin assignment (Goldeye xy-...)

This manual is related to the following products: