Climax LM5000 OBS Portable MILL - Manual (Page 13)

05/99 13
NO. DESCRIPTION
(D) Heavy-duty electric feed assembly with local
control
1/8 hp (.09 kW) feed assembly attaches directly to
either end of the base or ram leadscrews and provides
2:1 reduction feed. Unit has three mounting positions to
clear obstructions. Dial is graduated in .001" increments.
One full turn equals .100" (2.54 mm). Electric power
feed speed is up to 24" (609.6 mm) per min. Assembly
includes limit switches (not shown).
Recommended for
vertical and overhead applications.
29619 Heavy-duty electric feed assembly with local
control, 48" (1219.2 mm) main bed
29621 Heavy-duty electric feed assembly with local control,
72" (1828.8 mm) main bed
29615 Heavy-duty electric feed assembly with local control,
96" (2438.4 mm) main bed
29617 Heavy-duty electric feed assembly with local control,
ram and cross slide
30545 Heavy-duty electric feed assembly with local control,
cross feed
30464 Heavy-duty local feed controller
20997 (E) Tool Kit
Complete set of tools, including instruction manual and
hex wrenches.
20667 (F) #40 Milling Head Assembly
The hydraulically powered milling head mounts to the
vertical slide assembly. The milling head can be
positioned in 90 o increments around the saddle. The
compact aluminum gear box, with belt drive and a 1:1
drive ratio, can be rotated up to 180 o around the end of
the vertical slide to fit in tight places. A draw bolt and
drive lugs hold the milling cutter securely in the spindle.
(G) Hydraulic Drive Motors
Reversible motors with SAE 2-bolt mounting flange to
mount to the milling head gear box. Motor ports are
7/8-14 SAE O-ring type. Fittings are included with the
hydraulic power unit. Power unit specifications:
5 hp; 6 gpm (22.7 L/min) 1200 psi (8268 kPa)*
*For 50 Hz operation, torque remains constant and
rpm decreases by 16%.
20684 Motor, hydraulic:
displacement 3.6 in 3 59.0 cm 3
motor rpm 363
motor torque 563 in-lbs 64 N•m
21530 Motor, hydraulic:
displacement 5.9 in 3 96.8 cm 3
motor rpm 221
motor torque 955 in-lb 108 N•m
20231 Motor, hydraulic:
displacement 7.3 in 3 119.7 cm 3
motor rpm 177
motor torque 1209 in-lbs 137 N•m
39828 Hydraulic motor fitting kit - 1/2 " fittings (not shown)
Fitting kit includes fittings needed to connect motors
listed above to power unit hoses with 1/2" female quick
disconnect fittings. These fitting kits are included with
every Climax hydraulic power unit.
PM5000 Components
Drawings may not represent
actual product.