B&K Precision 879B - Manual User Manual
Page 48
46
display shows “
dEF”, either press
or
button to change the setting so that the secondary
display shows “
yES”. Upon saving and exiting the
utility menu, the instrument will automatically reset
back to its original settings. Below is a table of all the
settings that will be restored.
Table 3 - Instrument Default Settings
Settings
Default Configuration
Primary Function
C (Capacitance)
Secondary Function
None
Measurement Method
SER (Series)
Test Frequency
1 kHz
Beep
On
Auto Power-off
15 (15 minutes)
Power-up State
PrE
Reset Default Settings
No
Note: In the case where under “PuP” option, “SEt” is
selected and “
dEF” is set to “yES”, the “PuP” setting
has priority over the “
dEF” setting. This means the
instrument will not be set back to default upon saving
and exiting the utility menu. Instead, the power-up
settings will be stored and will be recalled upon the
next power-up of the instrument.