B&K Precision 879B - Manual User Manual
Page 43

41
Note: When the timer has reached the configured
time, the meter will make an audible “beep” sound
continuously for 10 seconds before auto power-off.
To stop the “beep” sound, simply press any button to
resume operation and reset the timer count.
The available timer settings are:
5 minutes, 15
minutes, 30 minutes, 60 minutes, and off.
When the primary display shows “
AoFF”, push the
or
button to select the timer setting. The
settings will be shown on the secondary display as
follows:
Table 2 - Auto Power-off Options
SECONDARY
DISPLAY
REPRESENTATION
5
5 minutes
15
15 minutes
30
30 minutes
60
60 minutes
OFF
No timer. Manual
power off only
Default Setting: 15
This manual is related to the following products: