B&K Precision 879B - Manual - Manual (Page 40)

38
power-off timing, power-up state, and reset instrument
to default settings.
Entering Utility Menu
Press and hold down the button for two
seconds or until the primary display shows “ bEEP”.
This indicates the meter is currently in the utility menu.
Configuration and Settings
There are four different menu options and
configurable settings under each option. Below is a
table that lists these options and settings.
Table 1 - Utility Menu Options and Settings
MENU OPTIONS
SETTINGS /
PARAMETERS
bEEP ON / OFF
AoFF 5 / 15 / 30 / 60 / OFF
PuP PrE / Set
dEF yES / NO