Avision AM7100NF User Manual - Manual (Page 64)

57
Menus Example 3 – Change Fax Quality
If you wish to change your quality type during fax transmission, please follow these
steps:
1. Press the Menu button on the control panel. The LCD-display shows the
following Menu screen.
Menu/to select
Press WX, Num
2. Press the Set button, the Left-arrow or the Right-arrow button. The
LCD-display shows “1. Common Setup”.
1. Common Setup
Press WX, Set
3. Press the Left-arrow or the Right-arrow button repeatedly until “7. FAX
Setup” appears on the display.
7. FAX Setup
Press WX, Set
4. Press the Set button and then press the Right-arrow button until “78. Quality”
appears on the LCD-display.
78. Quality
Press WX, Set
5. Press the Set button. The LCD-display shows the following information.
STD.
Press WX, Set
6. Press the Right-arrow button until your desired copy type appears on the
LCD-display. For example, Photo.
Photo
Press WX, Set
7. Press the Set button to save the setting. The LCD-display shows “Setting OK”.
This means you have changed the setting successfully.
Quality
Setting OK