Avision AM7100NF User Manual - Manual (Page 148)

141
3.
Specify your input tray, paper size and orientation on the LCD panel.
a. Press the Menu button on the control panel. The LCD-display shows the
following Menu screen.
Menu/to select
Press WX, Num
b. Press the Set button, the Left-arrow or the Right-arrow button. The
LCD-display shows “1. Common Setup”.
1. Common Setup
Press WX, Set
c. Press the Set button. The LCD-display shows “11. Language”.
11. Language
Press WX, Set
d. Press the Left-arrow or the Right-arrow button. The LCD-display shows
“12. Input Tray” on the display.
12. Input Tray
Press WX, Set
e. Press the Set button and then press the Left-arrow or the Right-arrow
button until your desired tray (for example, tray 1) appears on the
display.
Tray 1
Press WX, Set
f. Press the Set button. The LCD-display shows “Paper A3 ” on the display.
Paper: A3
Press WX, Set