Setting the timeout period for a netscan image – Avision AM7100NF User Manual User Manual
Page 122
115
Setting the timeout period for a netscan image
To effectively manage the scanned images by netscan, a timeout period is
provided for each image.
To set the timeout period,
1.
Press the Menu button.
2.
Press the Right-arrow or the Left-arrow button until “6. Net Scan Set”
appears on the display.
3.
Press Set.
4.
Select “64. Time Out Set” by using the Right-arrow or the Left-arrow button
and then press Set.
64. Timeout Set
Press W X, Start
5.
Select your desired timeout value from either 15 or 30 minutes by using the
Right-arrow or the Left-arrow button, and then press Set. After the timeout
period, the scanned image specified by an ID number will be removed.