Avision AM7100NF User Manual - Manual (Page 125)

118
Using Storage Copy and Storage Print
With the built-in memory, the product allows you to save your copy or print job
temporarily and let you copy or print your document at a later time.
You can perform the following three storage functions:
• Storage Copy: Storage Copy lets you scan your document first and then
save the scanned images in the product. Access the scanned images and
make copy of these images from the product later.
• Storage Print: Storage Print lets you save your print job via the printer
driver first and then execute the printing of the job from the product later.
• Security Print: Security Print provides security of your document by
creating a password to the file.
Saving Your Copy Job Temporarily
To temporarily save your copy job,
1. Place your document either on the flatbed glass or into the ADF input tray.
2. Press the Copy button on the control panel.
3. Press Program button on the control panel. The LCD-display shows the
following display. (Make sure to set up all desired copy functions before
pressing the Program button.)
ID:
Press Num, Start
4. Enter your ID number by the numeric pad. Up to 10 alphanumeric characters
can be entered.
5. Press the Start button to start scanning your document.
Press 1 to save and append current images to the same ID job or press 2 to
enter another ID number.
6. After scanning, the LCD-display shows the following message if you place
your document on the flatbed.
Next Page:1
To Finish: 2
7. Press 1 to continue to scan more pages or press 2 to finish your scan. Your
document image will be saved to the product’s memory.