Avision AM7100NF User Manual - Manual (Page 172)

165
Message Description or problem solving steps
Fax Error Code
Code Problem Description/Solution
0000 Communication
successfully
5634 User abort User has cancelled the job during faxing.
5649 No Answer This code indicates that fax signal is not
received after dialing.
Confirm that remote fax number is
correct.
If the fax number is correct, try to extend
“Connect time” in Fax Maintenance
(item# 718) menu.
5860 Line not
connected
Check if the telephone line cord has been
firmly connected.
(Plug one end of the telephone line cord
to the “LINE” jack at the back of the
product, and the other end to the “RJ-11”
telephone jack provided by the telephone
company.
5874 No Dial Tone Press the On Hook key to confirm whether
you can hear the dial tone or not.
If you can not hear the dial tone, check if
your telephone cord has been correctly
connected.
5875 Line Busy Please wait a few seconds and try again.