Autel MaxiTPMS TS601 - Manual (Page 61)

59
Figure 6.26
4) Wait a few seconds or press any key to return to previous screen.
6.9 Viewing Vehicle Information
This function enables retrieval of Vehicle ID No. (VIN), Calibration
ID Nos. (CINs), Calibration Verification Nos.(CVNs), In-use
Performance Tracking, and ECU Name.
1) From the Diagnostic Menu, use the UP/DOWN scroll button to
select Vehicle Info. and press the Y button. (Figure 6.3)
2) Wait for the scan tool to display the Vehicle Info. menu. (Figure
6.27)
Figure 6.27
 If the vehicle does not support this mode, a message shows on
the display warning that the mode is not supported.
3) From Vehicle Info. menu, use the UP/DOWN scroll button to
select Vehicle ID Number and press the Y button.