Autel MaxiTPMS TS601 - Manual (Page 27)

25
NOTE: With Ford sensors, the tool should be held 180 degree away
from the stem. Please refer to vehicle user’s manual.
 If the TPMS sensor requires a magnet, place the magnet over the
stem and then place the tool alongside the stem, and press the
TEST button.
Figure 4.12
 If the TPMS sensor requires tire deflation (of the order of
10PSI), then deflate the tire and place the tool alongside the
stem while pressing the
TEST button.
Figure 4.13
 Anytime while doing the TPMS test, press
BUTTON to
read the sensor make, OEM part no., and relearn information
for the vehicle being tested. Use the UP/DOWN scroll button
to view all details if the data information covers more than one
page.