Autel MaxiTPMS TS601 User Manual
Page 31
29
1) Connect the TPMS tool to the vehicle‘s DLC with the OBD II
cable. Press the POWER BUTTON to turn on the tool.
2) Turn the ignition on but do not start the engine.
3) Make sure the testing mode is set to All Wheels mode in
System Setting.
4) Follow the same process in 4.1 TPMS Sensor Check to enter
the activation screen. Use the UP/DOWN scroll button or
LEFT/RIGHT scroll button to select the TPMS Relearn
function. (Figure 4.20)
Figure 4.20
5) The tool will display a function screen as below. Use the
UP/DOWN scroll button to select TPMS Diagnosis or TMPS
Sensor Information, and press the Y button to continue.
(Figure 4.21)
Figure 4.21