Autel MaxiTPMS TS601 - Manual (Page 48)

46
 If the “LINKING ERROR” message does not go away, then
there might be problems for the scan tool to communicate with
the
vehicle. Contact your local distributor or the
manufacturer’s customer service department for assistance.
7） View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. (Figure 6.1 )
Figure 6.1
 If more than one module is detected, you will be prompted to
select a module before testing. (Figure 6.2 )
Figure 6.2
 Use the UP/DOWN scroll button to select a module and press
the Y button.
6.1 Read Codes