Autel MaxiTPMS TS601 - Manual (Page 24)

22
The tool will do TPMS test in a sequence of FL (Front Left), FR
(Front Right), RR (Rear Right), LR (Rear Left) and SPARE, if the
vehicle has the option for the spare. Or, you can use the UP/DOWN or
LEFT/RIGHT scroll button to move to the desired wheel for testing.
Place the tool alongside the valve stem, point toward the sensor
location, and press the TEST button.
The tool will send LF signal to trigger the sensor. Depending on the
sensor type, the tool will activate the sensor on the first or last step.
Once the sensor is successfully activated and decoded, the tool will
display as below with a beep. (Figure 4.9)
Figure 4.9
 Wheel with a feedback icon, “√” ,”x”, “D”, indicates wheel
test has been finished.
 Press Y button to read all sensor data, including sensor ID, tire
pressure, temperature, battery condition and modulation.
One Wheel Mode
In this mode the screen will show as below (Figure 4.10). The tool will
check TPMS sensor on the single wheel. Place the tool alongside the
valve stem, point toward the sensor location, and press the TEST
button. Wait for test result before moving the tool.
The tool will send LF signal to trigger the sensor. Depending on the
sensor type, the tool will activate the sensor on the first or last step.