Autel MaxiTPMS TS601 - Manual (Page 18)

16
1) From System Setting screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select About, and press the
Y button; wait for the About screen to appear.
2) View tool information on screen. (Figure 3.11) Press the N
button to exit.
Figure 3.11
3.9 Product Troubleshooting
This part describes problems that you may encounter while using the
TPMS tool.
Vehicle Linking Error
A communication error occurs if the TPMS tool fails to communicate
with the vehicle‘s ECU (Electronic Control Unit) when running the
diagnostic function. You need to do the following to check up:
 Verify that the ignition is ON.
 Check if the TPMS tool‘s OBD II connector is securely
connected to the vehicle‘s DLC.
 Verify that the vehicle is OBD II compliant.
 Verify that the vehicle is equipped with TPMS.
 Verify the tool battery is sufficiently charged.