Autel MaxiTPMS TS601 User Manual
Page 25
23
Once the sensor is successfully activated and decoded, the tool will
display as below with a beep. (Figure 4.11)
Figure 4.10
Figure 4.11
Once the first sensor test is completed, the screen will hold for 3
seconds for data viewing and then switch to next sensor test. Follow
the same procedure for the other sensor tests.
The tool can save up to 5 TPMS sensor data records at each time. Press
the UP/DOWN or LEFT/RIGHT scroll button to turn over data
screens while viewing. If more than five records are stored, the latest
record will overwrite the first one.