Autel MaxiTPMS TS601 - Manual (Page 11)

9
Figure 3.1
3.8 System Setting
The tool allows you to make the following adjustments and settings.
1) Language: Selects the desired language.
2) Beep Set: Turns on/off key-press beep.
3) ID Format: Sets the ID displaying in Hexadecimal or Decimal.
4) Pressure Unit: Sets the pressure unit in Kpa, Psi or Bar.
5) Temperature Unit: Sets the temperature unit in degree Celsius
or Fahrenheit.
6) Wheels to Test: Gives the operator the choice to test One wheel
or All wheels.
7) Distance Unit: Sets the distance unit in Km or mile.
8) Auto Power-off: Sets the time to power off automatically.
9) About: Views important information of the tool.
 Settings of the unit will remain until change to the existing
settings is made.
To enter the Setting menu
From the Main Menu: Use the UP/DOWN and LEFT/RIGHT
scroll button to select Setting, and press the Y
button. Following the