Autel MaxiTPMS TS601 - Manual (Page 36)

34
3) If the erase command is sent successfully, the screen will show
as below (Figure 4.29). Press any button to continue. To make
sure codes are erased clearly, run Read Codes again.
Figure 4.29
E. Live Data
In this function, you can not only read the live data but also record
live data for later review.
1) From the TPMS Diagnosis Menu, use the UP/DOWN scroll
button to select Live Data, and press Y button. (Figure 4.22)
All Data
1) From the Live Data menu, use the UP/DOWN scroll button to
select All Data and press the Y button. (Figure 4.30)
Figure 4.30