Autel MaxiTPMS TS601 - Manual (Page 17)

15
3) Press the Y button to save your settings and return to previous
menu, or press the N button to exit without change.
Power-off
1) From System Setting screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select Power-off, and
press the Y button.
2) Press the UP/DOWN SCROLL button to increase or
decrease the time to auto power-off the tool, and then press
the Y button to confirm your change or the N button to exit
without change. (Figure 3.10)
Figure 3.10
 NOTE: Before the tool powers off automatically, it will save all
the TPMS test data. Next time when the tool is powered on, you
may retrieve the recorded data. If the tool automatically powers
off during a test operation, next time when the tool is powered
on, it will automatically turn to the previous operation screen.
 NOTE: When using external power, the scan tool stays on until
you turn it off. When using internal battery power, the scan
tool turns off automatically after a set time of inactivity.
About
This function allows viewing of some important information such
as serial number and software version number of the tool.