Atec Agilent-N5182A - Manual (Page 32)

32
Archive Section
Frequency Minimum frequency 100 kHz 1
Output power Range 2 Standard Option 1EQ 3
(for serial number 100 kHz to 250 kHz -110 to +4 dBm -127 to +4 dBm
prefix 4742xxxx) > 250 kHz to 2.5 GHz -110 to +13 dBm -127 to +13 dBm
> 2.5 to 3.0 GHz -110 to +10 dBm -127 to +10 dBm
> 3.0 to 4.5 GHz -110 to +13 dBm -127 to +13 dBm
> 4.5 to 5.8 GHz -110 to +10 dBm -127 to +10 dBm
> 5.8 to 6 GHz -110 to +7 dBm -127 to +7 dBm
Output power Range 2 Standard Option 1EQ 3
(for serial number 250 kHz to 2.5 GHz -110 to +13 dBm -127 to +13 dBm
prefixes lower than > 2.5 to 3.0 GHz -110 to +10 dBm -127 to +10 dBm
4742xxxx) > 3.0 to 4.5 GHz -110 to +13 dBm -127 to +13 dBm
> 4.5 to 5.8 GHz -110 to +10 dBm -127 to +10 dBm
> 5.8 to 6 GHz -110 to +7 dBm -127 to +7 dBm
1. Performance below 250 kHz is unspecified
for units with serial numbers lower than
4742xxxx.
2. Quoted specifications between 20 and
30 °C. Maximum output power typically
decreases by 0.2 dB/°C for temperatures
outside of this range.
3. Settable to -144 dBm with Option 1EQ,
but unspecified below -127 dBm.
0.25 1000 2000 3000 4000 5000 6000
18
17
16
15
14
13
12
11
10
Measured maximum available output power
Frequency (MHz)
Max output power (dBm