Atec Agilent-N5182A - Manual (Page 20)

20
Markers
[Markers are defined in a segment during the waveform generation process, or from
the front panel. A marker can also be routed to the RF blanking and ALC Hold functions]
Marker polarity Negative, positive
Number of markers 4
Burst on / off ratio > 80 dB (typ)
AWGN [Option 403]
Type Real-time, continuously calculated and
played using DSP
Modes of operation Standalone or digitally added to arbitrary
waveform
Bandwidth 1 1 Hz to 100 MHz
Crest factor 15 dB
Randomness 90 bit pseudo-random generation, repetition
period 313 x 10
9
years
Carrier to noise ratio ± 100 dB when added to arbitrary
waveforms
Carrier to noise ratio error Magnitude error ≤ 0.2 dB at baseband I/Q
outputs
1. Maximum bandwidth depends on installed baseband generator options.