Atec Agilent-N5182A - Manual (Page 31)

31
Frequency 503 Frequency range from 100 kHz to 3 GHz
506 Frequency range from 100 kHz to 6 GHz
Performance UNZ Fast switching
enhancements 1EA High output power
1EQ Low power (< –110 dBm)
UNU Pulse modulation
UNW Narrow pulse modulation
320 Pulse train generator
UNT AM, FM, phase modulation
006 Instrument security
1ER Flexible reference input (1-50 MHz)
1EM Move RF output to rear panel 1
UK6 Commercial calibration certificate with test data
099 Expanded license key upgradeability 2
012 LO in/out for phase coherency
Vector specific options 651 Internal baseband generator (30 MSa/s, 8 MSa)
652 Internal baseband generator (60 MSa/s, 8 MSa)
654 Internal baseband generator (125 MSa/s, 8 MSa)
019 Increase baseband generator memory to 64 MSa
1EL Differential I/Q outputs
403 Calibrated AWGN
UNV Enhanced dynamic range
430 Multitone and two-tone
431 Custom digital modulation
432 Phase noise impairments
221-229 Waveform license 5-packs 1 to 9 (purchase up to 9
packs for 45 Signal Studio waveforms)
250-259 Waveform license 50-packs 1 to 10 (purchase up to
10 packs for 500 Signal Studio waveforms)
Signal Studio software N7600B Signal Studio for 3GPP W-CDMA with HSDPA/HSUPA
N7601B Signal Studio for 3GPP2 CDMA
N7602B Signal Studio for GSM/EDGE
N7606B Signal Studio for Bluetooth
N7611B Signal Studio for broadcast radio
N7612B Signal Studio for TD-SCDMA
N7613A Signal Studio for 802.16-2004 (WiMAX)
N7615B Signal Studio for 802.16 WiMAX
N7616B Signal Studio for T-DMB
N7617B Signal Studio for 802.11 WLAN
N7621B Signal Studio for multitone distortion test
N7622A Signal Studio toolkit
N7623B Signal Studio for digital video
N7624B Signal Studio for 3GPP LTE
N7625B Signal Studio for 3GPP LTE TDD
Accessories 1CM Rackmount kit
1CN Front handle kit
1CP Rackmount and front handle kit
1CR Rack slide kit
AXT Transit case
800 Customer service kit front panel RF connector
configuration (Parts kit enables owners to repair
the MXG on site, includes internal replacement
parts, tools, and a calibrated RF module.)
801 Customer service kit rear panel (1EM) RF connector
configuration (Parts kit enables owners to repair
the MXG on site, includes internal replacement
parts, tools, and a calibrated RF module.)
Ordering Information
1. Not available on N5162A MXG ATE.
2. For more information on upgrades and
Option 099 refer to Agilent MXG Signal
Generator Configuration Guide, literature
number 5989-5485EN.