Atec Agilent-N5182A - Manual (Page 11)

11
Single sideband phase noise [at 20 kHz offset]
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07
L(f) [dBc/Hz] vs. f[Hz]
1.E+01 1.E+08
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
5.8 GHz
3.5 GHz
2.2 GHz
1.9 GHz
1 GHz
850 MHz
Single sideband phase noise with I/Q modulation
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07
L(f) [dBc/Hz] vs. f[Hz]
1.E+01 1.E+08
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
5.8 GHz
3.5 GHz
2.2 GHz
1.9 GHz
1 GHz
850 MHz
Single sideband phase noise in CW mode
Spectral Purity
500 MHz ≤ –126 dBc/Hz (typ)
1 GHz ≤ –121 dBc/Hz (typ)
2 GHz ≤ –115 dBc/Hz (typ)
3 GHz ≤ –110 dBc/Hz (typ)
4 GHz ≤ –109 dBc/Hz (typ)
6 GHz ≤ –104 dBc/Hz (typ)
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 1.E+07
L(f) [dBc/Hz] vs. f[Hz]
1.E+01 1.E+08
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
5.8 GHz
3.5 GHz
2.2 GHz
1.9 GHz
1 GHz
850 MHz
Single sideband phase noise optimized signal-to-noise floor mode¹
1. Signal-to-noise optimized mode will improve broadband noise floor. In this mode, other specifications
may not apply. Applies to instrument serial number prefix 4818xxxx or above.
1. Signal-to-noise optimized mode will
improve broadband noise floor. In this
mode, other specifications may not apply.
Applies to instrument serial number prefix
4818xxxx, or above.