Alpha Technologies Celltron Essential CTE-1200 AT; CTE-2200 AT; CTE-3200 AT User Manual
Page 24
18
Selecting the TEST BATTERY option
After you complete the test setup by selecting parameters in the
DEFINE BATTERY
submenu, you have
the option of exiting and testing the site’s strings later, or testing immediately.
To begin testing immediately, press
ress
or
to select
1. TEST.
The analyzer will prompt you to
connect to the first jar to start the test with the saved settings. Refer to “Chapter 3: Testing.”
Editing a vendor name (EDIT VENDOR NAME)
To edit a vendor name:
1. Do the steps in “Selecting a jar (
SELECT BATTERY
).”
2. Select
EDIT VENDOR NAME
from the
DEFINE BATTERY
menu and press
ENTER
.
EDIT NAME
O
THER
3. Press
or
to scroll through the letters, numbers, and symbols for each character in the
name
and press
ENTER
after each selection.
Adding or editing a model name (EDIT MODEL NAME)
To add or edit a model name:
1. Do the steps in “Adding or editing a vendor name (
EDIT VENDOR NAME
).”
2. Press
Press
ress
or
to select
EDIT MODEL NAME from the DEFINE BATTERY
menu.
3. Press
Press
ress
or
to scroll through the letters, numbers, and symbols for each
character in the name
and press
ENTER
after each selection.
Note:
Vendor names and model names can be up to 18 characters long. When you
are done entering characters, press
ENTER
to fill the rest of the name with spaces
until you return to the
DEFINE BATTERY
menu.