Setting options in the utilities menu, Midtronics – Alpha Technologies Celltron Essential CTE-1200 AT; CTE-2200 AT; CTE-3200 AT User Manual

Page 17



11 

Setting options in the UTILITIES menu

Introduction
Before testing, you can set the options in the

UTILITIES

menu. If you do not set up values for the site

in this menu, the analyzer uses the defaults when you test the site. For information about the defaults

and descriptions of the values in the

UTLITIES

menu, refer to “Menu options” in Chapter 1.

Options
In the

UTILITIES

menu you can:

•

Select a language

(A. LANGUAGE)

•

Set the date and time

(B. SET DATE & TIME)

•

Set the date and time format

(C. SET DATE FORMAT)

•

Edit the site name

(D. EDIT SITE NAME)

•

Set percentages for warnings and failings

(E. SET WARN/FAIL %)

•

Set the low voltage value

(F. LOW VOLTS)

•

Toggle between

(G.) AUTO START

and

MANUAL START

•

Adjust the screen contrast

(H. CONTRAST)

•

Return to

(I. MAIN MENU)

Accessing the UTILITIES menu
To access the

UTILITIES

menu:

1. Press and hold the

MENU

button until the analyzer powers on.

CTE ALPHA

MIDTRONICS

1. SET PARAMETERS

2. TEST BATTERY

3. VIEW PARAMETERS

MENU

2. Press





to scroll to

UTILITIES

in the main

and press

ENTER

A. LANGUAGE

B. DATE & TIME

C. SET DATE FORMAT

UTILITIES

7. CHANGE REF.

8. UTILITIES

1. SET PARAMETERS

MENU

Note:

If you select an option you do not want to change, press

ENTER

to return to the

UTILITIES

menu.