Alpha Technologies Celltron Essential CTE-1200 AT; CTE-2200 AT; CTE-3200 AT - Manual (Page 21)

 15 
Accessing the SET PARAMETERS menu
To access the
SET PARAMETERS menu:
1. Press and hold the MENU button.
CTE ALPHA
© 2003 MIDTRONICS
MIDTRONICS
1. SET PARAMETERS
2. TEST BATTERY
3. VIEW PARAMETERS
MENU
Note: If a menu other than the main MENU is displayed, press
 or  to scroll to the MAIN MENU option and press ENTER .
2. Press ENTER to select 1. SET PARAMETERS .
3. Press ress  or  to scroll to the site you are setting up. Select Select 13. ALL SITES to make the
selections apply to all 12 sites.
Selecting 1. SYSTEM VOLTS
1. Press  or  to scroll to selection 1 in the SET PARAMETERS and press ENTER.
1. SYSTEM VOLTS 36
2. JARS & STRAPS
01. SITE 01
PARAMETERS
36
VOLTS PER STRING
SYSTEM VOLTS
Selecting 2. JARS ONLY or JARS AND STRAPS as a test point
You can configure the Alpha Celltron Essential to test jars or individual cells and inter-cell
connections of the strings in the site. To change the test point mode:
1. Press  or  to scroll to selection 2 in SET PARAMETERS, and press ENTER .
(JARS ONLY is the factory default.)
1. SYSTEM VOLTS 36
2. JARS ONLY
01. SITE 01
PARAMETERS
JARS AND STRAPS
JARS ONLY
SELECT TEST
2. Press  or  to scroll to JARS ONLY or JARS AND STRAPS, and press ENTER to select.