Cla-Val X144 Technical Manual - Manual (Page 25)

Table 6: X144 e-FlowMeter Operational Flow Ranges
22
Table 7: X144 e-FlowMeter Analog Range (4-20mA Scaling): Factory Settings
If required, the factory settings of the e-FlowMeter can be adjusted. A Cla-Val USB Adapter Cable is required and can be
ordered by contacting the factory at 800.942.6326.
Go to http://www.cla-val.com/software-driver-library.php for software/instructions.
SECTION 5: Specifications (continued)
Line Size
inches (mm)
*2"
(50mm)
(100-49
Body)
2-1/2"
(65mm)
3"
(80mm)
4"
(100mm)
6"
(150mm)
8"
(200mm)
10"
(250mm)
12"
(300mm)
16"
(400mm)
Minimum Flow
(GPM)
10 10 15 25 60 100 160 230 360
Maximum Flow
(GPM)
210 300 460 800 1800 3150 4950 7000 11000
Minimum Flow
(l/S)
0.65 0.65 1.0 1.5 3.8 6.3 10.0 15 23
Maximum Flow
(l/S)
13.3 18.9 29 50 110 200 310 440 700
Notes: * Pulse Width = 250ms.
**2" X144 e-FlowMeter may be installed on new valves only. Consult Factory for Angle Pattern Applications
Port Style
Line Size
inches (mm)
**2"
(50)
(100-49
Body)
2-1/2"
(65)
3"
(80)
4"
(100)
6"
(150)
8"
(200)
10"
(250)
12"
(300)
14"
(350)
16"
(400)
18"
(450)
20"
(500)
24"
(600)
30"
(750)
Full Port
Valves
4mA = 0
(GPM -
l/s)
20mA Range
(GPM)
260 375 575 1000 2250 3900 6000 8750 10500 14000 17500 22000 31000 52000
20mA Range
(l/s)
16.4 23.7 36.3 63.1 140 245 380 550 660 880 1100 1390 1950 3280
Full Port
Pulse
Weight*
Gal/Pulse 5 6.5 9.5 17 38 65 100 150 175 235 290 365 515 865
l/Pulse 19 25 36 65 145 245 380 565 660 890 1100 1380 1950 3275
Reduced
Port
Valves
4mA = 0
(GPM-
l/s)
20mA Range
(GPM)
not available
675 1600 2900 4500 5650 7750 9350
Consult Factory
20mA Range
(l/s)
42.5 100 180 285 355 490 590
Reduced
Port
Valves
Pulse
Weight*
Gal/Pulse 11.5 26 48 75 95 130 155
l/Pulse 44 99 180 285 360 495 585