Cla-Val X144 Technical Manual - Manual (Page 14)

Section 2: Installation of the X144 e-FlowMeter (continued)
2.4 - Step-by-Step Instructions Mechanical Installation
10) Ensure that the e-FlowMeter is properly seated and tight using the knurled lock, hand tight only,
(Figure 2-11). Tighten M3 Allen set screw to lock orientation of head.
11
Figure 2-11
Log onto www.cla-val.com
and click on the X144 e-FlowMeter icon to
learn more
CAUTION:
If the e-FlowMeter is not properly seated, it will not hold pressure and will leak. To avoid
potential damage from water leaking at the tap, be sure that the e-FlowMeter is tight and
seated.