Extron Electronics USP 405 User Guide - Manual (Page 51)

3-11 USP 405 • Serial Communication
Setting the Output Rate Using the Per Input Feature
Using the Per Input feature, each input (1 through 5) can have a different output
rate associated with it. This feature must be initially configured through the
USP 405’s Control Program for Windows. The initial configuration is stored in
memory, and can be recalled whenever the output resolution is set to Per Input
via either RS-232, the Control Program, or the USP’s front panel controls.
As an example, the Per Input feature can be used in applications where the
USP 405 is being used in conjunction with a matrix switcher that has a variety of
inputs and outputs. See the example below. This feature allows the USP to
automatically upscale/trans-scale/scan convert the input signal, without
additional programming.
Only one process (scaling, trans-scaling, or scan conversion) can occur at
one time. For example, you cannot scale and scan convert an input at the
same time.
DVD Player
VCR
Video Camera
USP 405 UNIVERSAL SIGNAL PROCESSOR
ADJUST MENU
NEXT
FREEZE 1 2 3 4 5
PICTURE ADJUSTMENTS CENTER SIZE BRT/CONT COL/TNT ZOOM DETAIL INPUTS RGB UNIVERSAL FREEZE COMPOSITE S-VIDEO SDI
RGBHV
Extron's Crosspoint 1616
Matrix Switcher
Extron's USP 405
Laptop
Computer
Videoconferencing
LCD Projector
Extron's
RGB 109 xi
S-video
S-video
S-video
RGBHV
S-video
RGBHV
RGBHV
RGB 109xi
BUFFERED LOCAL
MONITOR OUTPUT H. SHIFT INPUT
VGA INTERFACE WITH ADSP
ID PIN 4 ID PIN 11
S-video
S-video
RGBHV
RGBHV